採用情報バナー

CF Wheel

Carbon Fiber Composite Wheel Series 16inch Composite Wheel
for Solar Cars

Carbon composite wheels optimized
for 95/80 R16 tires

  • (01)

    Sandwich Construction with aluminum honeycomb core material

  • (02)

    The hub mounting section uses aluminum.

  • (03)

    Weight: 1800g

  • (04)

    Rim/Hub Monocoque Construction

  • (05)

    Compatible with DD motors and center lock hubs

  • (06)

    Compatible Tires: 95/80 R16 tires

Specifications
Article No. CFW-S16-94C-2 Honeycomb
sandwich
construction		 \205,000- (Packing charges ,
Shipping charges
not included)
Specifications Rim size 3.00×16”　Tubeless type
Wheel outer diameter 433.2mm
Offset 22.3mm
Hub
conpatible		 Hub type:Central diameter Φ94,Centerlock
Dowel pin type:6-Φ8×4.0 PCD116
Wheel weight 1,800g
Air pressure
resistance		 6.0kgf/cm²
Load capacity 100kgf
Compatible Tire 95/80 R16

Extaerior
Outside image, Inside image
Partical cross section

Please read the text below prior to using or purchasing a wheel from us.

  • CF wheels are high-performance racing wheels designed for solar cars and specialized lightweight vehicles.
  • Designed exclusively for pure racing use, handle with extreme caution and take care to observe the following points in particular.
  • Please ensure proper installation, use, and maintenance to prevent deterioration in strength and quality.

Handling / Storage

  • CF wheels are composed of CF (carbon fiber) and epoxy resin.
  • Avoid prolonged exposure to direct sunlight, as UV rays cause degradation.
  • Do not store in high-temperature or high-humidity environments.
  • Please treat carefully surface of the CFRP wheel product enough not to damage it.
  • Be careful not to scratch or impact the surface of the CFRP wheel.
  • Discard any wheel that shows deformation or cracks.

Tire set

  • When mounting or changing tires, avoid using metal tools. Use soft plastic tools whenever possible to prevent rim scratches.
  • When installing the air valve, ensure the rubber sealing(O-ring) is securely tightened to prevent air leaks.
  • Thoroughly check for air leaks at the tire-to-rim interface and around the valve area.
  • When mounting the tire onto the rim, ensure the tire bead does not strike the wheel rim forcefully. Perform the fitment at a pressure of 6.0 kgf/cm² or less.

At the time of use

  • Air pressure in a tire should be equal or less than 6.0kg/cm2.
  • Always wear protective gear such as safety glasses and gloves when handling the tire set.
  • Before using, thoroughly check the entire wheel to confirm no damage (cracks, etc.) to the CFRP.
  • If tire pressure drops significantly in a short time, it may indicate air leakage due to rim damage or rim deformation. If this occurs, stop using the wheel immediately.
  • If you feel abnormal vibration or hear unusual noises while using, stop immediately in a safe location and check the wheel.

Additional Notes

  • CF wheels are designed for racing use. The user assumes full responsibility for their use, and our company cannot be held liable.